Ac Power Inlet; On/Off Switch; Bluetooth Function - Peavey LN 1263 Manual

(11) Outputs to Satellite Speakers
Stereo outputs for the satellite speakers.

(12) AC POWER INLET

This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to this
connector to provide power to the unit. Damage to the equipment may result if improper line voltage is used.
(See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not
have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded
properly. To prevent risk of shock or fire hazard, always make sure that the amplifier and all associated
equipment is properly grounded.
(13) LINE VOLTAGE SELECT SWITCH
This selector switch allows the amplifier to be operated at different line voltages. Please be sure this switch is set to
the proper voltage for your area before connecting the amplifier to a power source or turning the amplifier on for
the first time.
NEVER CHANGE THE POSITION OF THIS SWITCH WHILE THE System IS TURNED ON.
(14) ON-OFF SWITCH
This rocker switch supplies AC power to the system when switched to the ON position. The ON position is with
the right side of the switch pushed "in" or nearly flush with the rear panel.

Bluetooth Function

In order to utilize the Bluetooth control function of the LN™ 1263, download the Peavey® LN™ 1263 app onto
your iOS device. Connect your device via Bluetooth to the LN™ 1263. Once you open the app, you will have ac-
cess to the following control screens:
Main Mixer Control Screen
7
Individual Channel Equalization (Simple Mode)