Advertisement
CLOSING THE SHIELD CASE
Determine a desired monitoring area and close the shield case.
Then, tighten up the screw as shown to fix the case.
PANNING & TILTING CONTROL
You can adjust the Panning and Tilting angle freely. (Panning angle: ±10º, Tilting
angle: 0º~90º)
Tilt Base
You can adjust up and down
the camera (0º~90º).
1. Adjustment Panning angle: After attaching the dome camera to a ceiling, adjust the
panning angle for better monitoring area by rotating the Pan Base. The panning
angle can be adjusted ±10º freely.
2. Adjustment Tilting angle: After attaching the dome camera to a ceiling, adjust the
tilting angle for better monitoring area by rotating the Tilt Base. The tilting angle can
be adjusted to 0º from 90º freely. (based the ceiling surface)
Pan Base
You can rotate the lens from ±10º
P/No. : Z6806142201A/01
Advertisement
