Table of Contents
Advertisement
Working with the smoothie
insert / fruit filter
With this insert it is particularly easy to
make smoothies made of fresh fruits, milk,
soya milk, yoghurt and juices.
Fig. C
■ Prepare blender as described above.
■ After attaching and screwing on the
blender jug, the smoothie insert / fruit
filter is inserted into the blender jug.
■ Put lid on and press down all the way.
■ Insert the mains plug.
■ Put ingredients through the feed tube into
the blender jug; chop up fruit beforehand
if required.
Warning!
Do not put large, hard ingredients in the
blender jug, e.g. stones from avocados or
plums.
■ Insert measuring cup into feed tube.
■ Switch on the appliance.
After using the appliance
■ Set the rotary switch to 0/off.
■ Remove mains plug.
■ Remove the blender jug by rotating it in
an anti-clockwise direction.
■ Take the lid off the blender jug.
■ Empty blender jug.
Instructions for the smoothie insert /
fruit filter:
Take measuring cup out of the lid and plug
into the smoothie insert / fruit filter. This
prevents integral components from falling
out of the insert into the drink.
■ Turn blender jug over and put down with
the opening face down.
■ Remove blade holder. To do this, fold the
handle upwards and pull out the blade
holder.
■ Clean all parts, see "Cleaning and
servicing".
Universal cutter
for cutting smaller quantities of meat, hard
cheese, onions, parsley, garlic, fruit and
vegetables.
Pay attention to Figure F !
It is not permitted to cut coffee beans,
pepper corns, sugar, poppy seeds and
horseradish.
Note: If the universal cutter is not included
with the blender, it can be ordered from
customer service (order no. 12007111).
W Risk of injury from sharp blades/
rotating drive!
Do not remove or attach universal cutter
until the appliance has been switched off
and the drive has come to a standstill.
Fig. D
■ Put down universal cutter jug with the
opening face up.
■ Add food, which is to be cut, in the
universal cutter.
■ Place seal on the blade holder. Ensure
that the seal is positioned correctly.
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
■ Grip blade holder by the handle and
insert into the universal cutter jug.
Note shape of the parts (Fig. D-2)!
■ Move handle (Fig. D-3). This locks the
blade holder in the universal cutter jug.
■ Turn universal cutter jug over.
■ Place universal cutter jug on the drive on
the motor block. Arrow on the universal
cutter jug points towards the dot on the
motor block.
■ Attach universal cutter jug by turning it all
the way clockwise.
■ Switch on the appliance: set the rotary
switch to on.
■ Turn rotary switch to Q and hold.
or
■ Press required quick selection button
(V or Q, depending on model).
Note: The longer the appliance remains
switched on, the finer the ingredients are
cut. In the case of herbs the required cutting
result can be achieved very quickly after
switching the appliance on.
After using the appliance
■ Set the rotary switch to 0/off.
■ Remove mains plug.
■ Remove universal cutter jug by turning
it anti-clockwise.
■ Turn universal cutter jug over.
Operation
en
7
Advertisement
Table of Contents
