Specifications - Sharp FX-J80U Operation Manual

ERROR DISPLAY
• The communication between
SHARP server and the air purifier is
not available.
Please check the Wi-Fi Connect
Flash quickly
Guide for details.
• The concentration of Plasmacluster
ion is descending.
⇒ Maintain the electrode section of
the Plasmacluster ion generating
unit. (Page 15)

SPECIFICATIONS

Model
Power supply
Fan Speed Operation
Recommended Room Size*2
High density Plasmacluster ion Recommended Room Size*3
CADR (Dust / Smoke / Pollen)
Filter type
Cord Length
Dimensions
Weight
*1 Noise level is measured based on the JEM 1467 standard of the Japan Electrical
Manufacturers' Association.
*2 Size of a room which is appropriate for operating the product at maximum fan speed.
*3 Room size in which approximately 25000 ions per cubic centimeter can be measured in the
center of the room when the product is placed close to a wall, is operating on MED mode, and
is at a height of approximately 1.2 meters from the floor.
This product consumes a minimal amount of power while in standby mode.
Standby Power
For energy saving, unplug the power cord when the product is not in use.
Fan Speed Adjustment
Rated Power (W)
Fan Speed (CFM)
Noise Level (dBA)*1
Standby Power (W)
Dust collection
Deodorization
• Is the Plasmacluster ion generating
unit inserted properly?
⇒ Pull out the Plasmacluster ion
generating unit and insert it to the
end again, and then operate again.
• Unplug the product, wait one minute,
and then plug the product in again.
120 V / 60 Hz
MAX
70
321
49
0.9 (When Wi-Fi adapter is ON.)
0.7 (When Wi-Fi adapter is OFF.)
502 sq. ft. ( 47 m
377 sq. ft. ( 35 m
334 / 324 / 361
True HEPA Filter
Active Carbon Deodorizing Filter
6.6 ft. ( 2.0m )
16.4 in. ( W ) × 11.5 in. ( D ) × 28.7 in. ( H )
( 416 mm ( W ) × 291 mm ( D ) × 728 mm ( H ))
23.8 lbs. ( 10.8 kg )
EN-17
FX-J80U
MED SLEEP
27 3.2
170 35
45 15
2 )
2 )