Aiwa XR-HG5MD Service Manual page 6

CAUTIONS WHEN ASSEMBLY
1. Assembling the CAM, LOAD
Move the LEVER ASSY, CAM in the direction of the arrow as far as it can go.
Rotate the CAM, LOAD so that its positioning hole is moved as close as possible to the shaft of the LEVER, SW H.
Attach the CAM, LOAD so that it engages with the teeth of the GEAR, IDLER2.
LEVER ASSY, CAM
2. Assembling the PLATE ASSY, SLIDE L
Align the shaft of the PLATE ASSY, SLIDE L with the arrow-marked position of the CAM, LOAD.
CAM, LOAD
CAM, LOAD
positioning hole
CAM, LOAD
– 6 –
Shaft of LEVER, SW H