Aiwa XR-HG5MD Service Manual page 23

Pin No. Pin Name
58 LW/P23
59 SW/P22
60 FM1/P21
61 RDS/P20
62 AM-9K/10K/P19
63 Q-SUPR/P18
64 REA/P17
65 CST1/P16
66 CAM1/P15
67 AUTO2/P14
68 AUTO1/P13
69 CAM2/P12
70 REB/P11
71 CST2/P10
72 VDD4
73~81 P9~P1
82 O-KSCAN/CLKADJ
83 O-CD CLK
84 O-LED STB
85 O-DISH FWD
86 O-DISH RVS
87 O-PLL CE
88 O-STBY-LED
89 VSS2
90 VDD2
91 O-SOL1
92 O-SOL2
93 O-POWER
94 O-MDRES
95 O-SOUT
96 I-SIN
97 I-ACLK
98 O-ARDY
99 O-SREQ
100 O-MREQ
I/O
I/O LW diode input/FL segment output (P23).
I/O SW diode input (Not used)/FL segment output (P22).
I/O FM1 (OIRT) diode input (Not used)/FL segment output (P21).
I/O RDS diode input/FL segment output (P20).
I/O AM 10K diode input (Not used)/FL segment output (P19).
I/O Q-SUPR diode input (Not used)/FL segment output (P18).
I/O DECK side A record permission SW input/FL segment output (P17).
I/O DECK 1 cassette detect SW input/FL segment output (P16).
I/O DECK 1 CAM SW input/FL segment output (P15).
I/O DECK 2 auto stop input/FL segment output (P14).
I/O DECK 1 auto stop input/FL segment output (P13).
I/O DECK 2 CAM SW input/FL segment output (P12).
I/O DECK side B record permission SW input/FL segment output (P11).
I/O DECK 2 cassette detect SW input/FL segment output (P10).
– VDD (for FL).
O FL segment output (P9~P1).
O Key scan timing output.
O CD CLK ouput.
O Strobe output for LED driver.
O CD turnable forward revolution output.
O CD turnable reverse revolution output.
O Chip enable output for PLL.
O STBY LED ON output (STBY LED ON during O-POWER OFF).
– GND.
– Power supply.
O DECK 1 plunger ON/OFF output.
O DECK 2 plunger ON/OFF output.
O System power ON/OFF output.
O MD reset output (Active low).
O MD SOUT output.
I MD SIN input.
I MD ACLK input (Active low).
O MD ARDY output (Active low).
O MD SREQ output (Active low).
O MD MREQ output (Active low).
– 23 –
Description