GMC Buick Encore GX 2020 Owner's Manual page 263

262 Driving and Operating
A green ACC indicator and the set
speed display on the instrument
cluster. The vehicle ahead indicator
may be flashing if a vehicle ahead
was present and moved. See
Approaching and Following a
Vehicle later in this section.
Once ACC has resumed, the
vehicle speed will increase to the
set speed under the following
conditions:
There is no vehicle ahead.
The vehicle ahead is beyond the
selected following gap.
The vehicle speed is not being
limited because of a sharp turn.
Increasing Speed While ACC Is
at a Set Speed
If ACC is already activated, do one
of the following:
Use the accelerator to get to the
higher speed. Briefly press down
and release SET and release
the accelerator pedal. The
vehicle will now cruise at the
higher speed. When the
accelerator pedal is pressed,
ACC will not brake because it is
overridden. While overridden,
the ACC indicator will turn blue
on the instrument cluster and
Head-Up Display (HUD),
if equipped.
When the accelerator pedal is
pressed, ACC will not brake
because it is overridden. The
ACC indicator will turn blue on
the instrument cluster.
Press and hold RES+ up until
the desired set speed is
displayed, then release it.
To increase vehicle speed in
smaller increments, press RES+
up briefly. For each press, the
vehicle goes about 1 km/h
(1 mph) faster.
To increase vehicle speed in
larger increments, hold RES+
up. While holding RES+, the
vehicle speed increases to the
next 5 km/h (5 mph) step, then
continues to increase by 5 km/h
(5 mph) at a time.
The set speed can also be
increased while the vehicle is
stopped.
If stopped with the brake pedal
applied, press RES+ up until the
desired set speed is displayed.
If ACC is holding the vehicle at a
stop and there is another vehicle
directly ahead, pressing RES+
up will increase the set speed.
Pressing RES+ up when there is
no longer a vehicle ahead or the
vehicle ahead is pulling away
and the brake is not applied will
cause the ACC to resume
When it is determined that there is
no vehicle ahead or the vehicle
ahead is beyond the selected
following gap, then the vehicle
speed will increase to the set speed.
Reducing Speed While ACC Is
at a Set Speed
If ACC is already activated, do one
of the following: