GMC Buick Encore GX 2020 Owner's Manual page 262

Warning (Continued)
control is in before using the
feature. If ACC is not active, the
vehicle will not automatically
brake for other vehicles, which
could cause a crash if the brakes
are not applied manually. You and
others could be seriously injured
or killed.
Setting Adaptive Cruise
Control
If is on when not in use, it could
get pressed and go into ACC when
not desired. Keep off when cruise
is not being used.
Select the set speed desired for
ACC. This is the vehicle speed
when no vehicle is detected in
its path.
While the vehicle is moving, ACC
will not set at a speed less than
5 km/h (3 mph), although it can be
resumed.
While the vehicle is moving, ACC
will not set at a speed less than
25 km/h (15 mph), although it can be
resumed when driving at lower
speeds. The minimum allowable set
speed is 25 km/h (15 mph).
To set ACC while moving:
1. Press .
2. Get up to the desired speed.
3. Press SET down and release.
4. Remove your foot from the
accelerator.
After ACC is set, it may immediately
apply the brakes if a vehicle ahead
is detected closer than the selected
following gap.
ACC can also be set while the
vehicle is stopped and the brake
pedal is applied.
Driving and Operating
The ACC indicator displays on the
instrument cluster. When ACC is
turned on, the indicator will be lit
white. When ACC is engaged, the
indicator will turn green.
Be mindful of speed limits,
surrounding traffic speeds, and
weather conditions when selecting
the set speed.
Resuming a Set Speed
If the ACC is set at a desired speed
and then the brakes are applied,
ACC is disengaged without erasing
the set speed from memory.
To begin using ACC again, press
RES+ up briefly.
If the vehicle is moving more
than 5 km/h (3 mph), it returns to
the previous set speed.
If the vehicle is stopped with
the brake pedal applied, press
RES+ up and release the brake
pedal. ACC will hold the vehicle
until RES+ or the accelerator
pedal is pressed.
261