45261 Upper Cabinet Harness (Packed In Upper Cabinet Kit P/N 45251) - Filtec Omnivision 1000 Series Upgrade Installation Manual

UPS / Power Supply Assembly
Document 45277-0805
Spread a ring of silicone on the hole and seat the pin in the hole.
Tighten the pin down with the nut inside the upper cabinet.
45261 Upper Cabinet Harness (Packed in Upper Cabinet
Kit P/N 45251)
Start routing the Upper Cabinet Harness from the center. Monitor
cable (45201) as a reference for the center. The monitor cable
will run into the monitor enclosure. Run the rest of the harness
along the bottom of the cabinet and along the sides as indicated.
Connect the white cable (PN 40476-3) to the stack light.
Route the power supply cables as indicated in the following
drawings.
Connect all connectors and secure with tie wraps.
25