Westinghouse WVEP627 Series Quick Start Manual page 2

Set...
Installing the oven accessories
1. Insert side racks
There is a left hand and right hand version
(see image for details).
1. Insert the rear peg into the rear access
hole provided,ensuring that the peg is
fully inserted.
2. Then locate the front peg into the
front access hole and push in firmly.
Telescopic slides can be purchased
seperately.
2. To fit a shelf or tray to side racks:
1. Locate the rear edge of the
shelf/tray in between 2 guide
rails of the side rack - see
diagram.
2. Align the shelf to the same rail
positions on both sides, with
the front edge raised, begin to
slide the shelf into the oven.
3. When fully inserted the shelf/
tray should not interfere with
the closed oven door.
Set the time
You must set the time before you can operate
your appliance.
When power is supplied to the oven, the clock
icon will be displayed. Along with the
clock symbol the "12" will be flashing. This
indicated that the "hour" portion of the time
is ready to be changed.
Toggle the temperature selector
touch when you have the right hour.
FUNCTION TEMP
Hold 3s
The minutes will flash and can be set in the
ON/OFF BACK FAVOURITE
same manner. 5 seconds after the last
change, the clock display will stop flashing,
confirming that the time has been set.
NOTE: The clock has a 24-hour display.
or , then
SET TIME
16:30
00:15 140°C
ALARM
Left hand side rack
front peg
Condition the oven
New appliances can have oil or residue left
from manufacturing. You will need to heat
your oven for 30 minutes before using it for
the first time.
1. Turn the function selector dial to Fan
forced
2. Using the temperature selector, set the
oven at 180°C for approximately 30
minutes. Please ensure that the room is well
ventilated during this process.
OK
rear peg
Detent
(to burn off any residue)