Samsung AJ Series Installation Manual page 28

Installation Procedure
Step 11
Press button to be changed to HEAT mode in the OFF status
1 Press button to enter SEG23 value.
2 Press button to enter SEG24 value.
Step 12
Press button to check whether the option code you entered is correct or not.
Press operation button
Setting the indoor unit addresses automatically
NOTE
• For the best results, make sure that electrical wiring is done properly.
• For the best results, set the outdoor temperature to 41 to 104 ˚F (*) and set the indoor temperature to 60.8 ˚F or higher (*).
※ (*) Auto addressing may fail when the temperature is out of the range above. In this case, set the address manually.
CAUTION
• This product is prohibited one indoor unit installation. Don't use pipe checking operation and auto addressing mode
when one indoor unit is installed.
PCB MAIN - OUT
28
English
DB68-08940A-00_IM_FJM Outdoor_AA_EN.indd 28
Operation
to enter option.
DISPLAY 1
DISPLAY 2
K1 K2 K3 K4
Indication
2020-01-23 오후 12:38:09