Samsung AJ Series Installation Manual page 16

Installation Procedure
3 Insert both sides of core wire of the power cable into
the connection sleeve.
• Method 1: Push the core wire into the sleeve from
both sides.
• Method 2: Twist the wire cores together and push it
into the sleeve.
Method 1
Connection sleeve
4 Using a crimping tool, compress the two points and
flip it over and compress another two points in the
same location.
• The compression dimension should be 8.0
• After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1
Compress it 4 times
0.20inch
5 Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Method 1
Insulation tape
1.57inch
16
English
DB68-08940A-00_IM_FJM Outdoor_AA_EN.indd 16
6 Apply heat to the contraction tube to contract it.
Method 2
7 After tube contraction work is completed, wrap it with
Connection sleeve
• Make sure that the connection parts are not exposed
Compression
dimension
• Be sure to use insulation tape and a contraction tube
Method 2
Compress it 4 times
• In case of extending the electric wire, please DO NOT
0.20inch
Method 2
Insulation tape
1.37inch
Method 1 Method 2
Contraction tube
the insulation tape to finish.
Three or more layers of insulation are required.
Method 1 Method 2
Insulation tape
CAUTION
to outside.
made of approved reinforced insulating materials
that have the same level of withstand voltage with
the power cable. (Comply with the local regulations on
extensions.)
WARNING
use a round-shaped Pressing socket.
‐ Incomplete wire connections can cause electric
shock or a fire.
Contraction tube
Insulation tape
2020-01-23 오후 12:38:02