Samsung AJ Series Installation Manual page 24

Installation Procedure
Setting the outdoor option
• Press and hold K2 to enter the option setting.
(Only available when the operation is stopped)
‐ If you enter the option setting, display will show the
following.
‐ Seg 1 and Seg 2 will display the number for selected
option.
‐ Seg 3 and Seg 4 will display the number for set
value of the selected option.
• If you have selected desired option, you can shortly
press the K1 switch to adjust the value of the Seg 1, Seg
2 and change the function for the selected option.
Option item
Setting to Cool or Heat only
mode
Power improvement mode
Mixed mode indoor input
Auto Change Over
Channel address
CAUTION
• Edited option will not be saved if you do not end the option setting as explained in above instruction.
※ While you are setting the option, you may press and hold the K1 button to reset the value to previous setting.
※ If you want to restore the setting to factory default, press and hold the K4 button while you are in the option setting
mode.
24
English
DB68-08940A-00_IM_FJM Outdoor_AA_EN.indd 24
Input unit SEG1 SEG2
Main 0 0
Main 0 1
Main 0 2
Main 0 3
Main 0 4
Example)
• If you have selected desired option, you can shortly
press the K2 switch to adjust the value of the Seg 3,
Seg 4 and change the function for the selected option.
Example)
• After selecting the function for options, press and
hold the K2 switch for 2 seconds. Edited value of the
option will be saved when entire segments blinks and
tracking mode begins.
SEG3 SEG4
0 0 Cooling and Heating (Factory default)
0 1
0 2
0 0 Disabled (Factory default)
0 1
0 0 Disabled (Factory default)
0 1
0 0 Disabled (Factory default)
0 1 Enabled (Factory default)
A U Automatic setting (Factory default)
00 ~ 15
Function
Only Cooling
Only Heating
Enabled
Enabled
Manual setting
2020-01-23 오후 12:38:06