Amplicomms TCL 250 Operating Instructions Manual page 22

To select the alarm mode
1. At normal time display mode, press AL SET/SELECT
one at a time to activate the alarm(s), the corresponding
alarm indicator(s) in the display will be on:
: only shaker alarm is activated
: both sound and shaker alarm are activated
: both strobe light and shaker alarm are activated
activated.
2. Press AL SET/SELECTonce more to turn off all the
alarms, all
To stop and reset the alarm
When alarm is sounding, the corresponding alarm indicator
flashes. Press AL SET/SELECT once to stop the alarm and
reset it to come on the following day. After that, the
corresponding alarm indicator stays on the display.
To use snooze
When alarm is sounding, press
be stopped temporarily and the corresponding alarm indicator
keeps flashing. Alarm will come on again after the set snooze
duration is over.
(See chapter "Helpline" for costs and hours of operation)
: strobe light, sound and shaker alarm are
, and
Helpline UK 0844 800 6503
alarm indicators disappear.
once, the alarm will
19