Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Amplicomms TCL 190
Summary of Contents for Amplicomms TCL 190
- Page 1 Analogwecker mit schnurlosem Vibrationskissen Analogue alarm clock with cordless vibration pad Réveil analogique avec coussin vibrant inclus Analoge wekker inclusief trilkussen Bedienungsanleitung Operating Instructions Mode d’emploi Gebruiksaanwijzing TCL 190...
-
Page 2: Safety Information
Safety Information 1 Safety Information Please read this operating instruction manual thoroughly. Rechargeable batteries Intended use Attention: Never throw batteries into a fire. Only use This alarm clock is designed to provide an acoustic alarm or alert batteries of the same type. signal at a set time or on receipt of a telephone call. -
Page 3: Operating Elements
Operating Elements 2 Operating Elements Alarm clock (front view) 1 Snooze button 2 LED: Alarm ON/OFF / Battery charge low 3 Rotary knob: Switch alarm ON/OFF Status indicators in clock face LED (Pos. 2) Alarm function is activated: LED is red Battery charge low, alarm is activated: LED flashes green Battery charge low, alarm is deactivated: LED flashes... - Page 4 Operating Elements Alarm clock (rear view) 4 Rotary knob: Volume control 5 Rotary knob: Set one of the 5 acoustic signals 6 Rotary knob: Pitch 7 Sliding switch: Vibration only", Acoustic signal only", Acoustic signal + Vibration" 8 Sliding switch: Flashing lamp ON/OFF 9 Sliding switch: Snooze delay, 0 min.", 5 min.", 15 min."...
- Page 5 Operating Elements Vibration pad Status indicators on vibration pad LED (Pos. 1) Switched on: LED flashes green every 2 sec. Charging process: LED is red Battery charge low: LED flashes red 1 LED: ON/OFF / Battery charge low 2 Sliding switch: Vibration pad ON /OFF 3 Battery compartment 4 Screws for battery compartment 5 Connection cable socket...
-
Page 6: Preparing The Equipment
1. First of all, insert the batteries supplied in the clock’s battery Checking the package contents compartment. The package contains: Content TCL 190 Analogue alarm clock Power adapter plug Vibration pad Connection cable for vibration pad Batteries for analogue alarm clock... - Page 7 Preparing the Equipment Basic settings 4. Connect the equipment as illustrated in the diagram. In order to be able to use the TCL 190 alarm clock, you must first carry out the following settings. Only use the telephone connection line supplied 1.
- Page 8 Snooze button (1). Using the telephone signal You can also use the TCL 190 alarm clock to signal incoming telephone calls. Connect the TCL 190 alarm clock to the telephone connection socket as illustrated in the connection diagram.
-
Page 9: Settings And Functions
Settings and Functions 4 Settings and Functions Setting the time Selecting the acoustic signal Turn the rotary knob (5) to set the required Use the rotary knob (15) to set the correct time. acoustic signal. Setting the alarm time Use the rotary knob (14) to set the time at Setting the pitch which the alarm should be triggered. - Page 10 Settings and Functions Setting the snooze delay 0m 5m 15m Use the sliding switch (9) to set the interval for the snooze delay. There are three settings available, SNOOZE from left to right 0 min", 5 min" or 15 min.". Activating the snooze delay If the snooze button is pressed at anytime when the light is switched off, then the illumination will switch on for 30 seconds...
-
Page 11: In Case Of Problems
− The battery charge is too low or the not work battery is defective. − Battery packs are available from Amplicomms. − The vibration pad is not switched on. − It is outside the range of the alarm clock. Alarm signal is not −... -
Page 12: Maintenance / Guarantee
Never use cleaning agents or solvents. Guarantee Declaration of Conformity equipment is produced and tested according to the AMPLICOMMS This device fulfils the requirements stipulated in the EU latest production methods. The implementation of carefully directive: chosen materials and highly developed technologies ensure trouble−free functioning and a long service life. - Page 13 Technical Data 7 Technical Data Vibration pad Value Range: Approx. 100 m (clear space) Analogue alarm clock Value Frequency: 433 MHz Battery: 3 x AAA 3.6 V, 800 mAh, NiMH Power supply: Input: 210-240 VAC, 50/60 Hz Output: 12 VDC, 670 mA Initial charging time: Up to 16 h Telephone plug:...
- Page 14 Notes Notes...
- Page 15 Important Notes on the Guarantee The period of guarantee for the AMPLICOMMS product begins on the date of purchase. Rights to claims under the terms of guarantee relate to deficiencies resulting from material or production faults. Rights to claims under the terms of guarantee are annulled following intervention by the purchaser or third parties.