Amplicomms TCL 250 Operating Instructions Manual page 19

Radio controlled time signal reception
After your clock is powered up, it starts to receive radio
controlled time signal. The
• Receiving signal (
• Successful reception (
• Failed reception (
Automatic reception and manual reception
Automatic reception
Your clock starts automatic reception everyday at 1:00, 2:00,
and 3:00. If it fails to receive the radio controlled time time
signal at 3:00, it will start reception at 4:00. If it fails again, it
will start reception at 5:00. If it fails again, it will start automatic
reception at 1:00 again in the next day.
During reception, all buttons do not function except the
button.
Manual reception
Simply press and hold WAVE/M to enter manual setting
mode. Your alarm clock will start manual reception with a
short beep. To stop the function, press and hold the WAVE/M
button again.
16
(See chapter "Helpline" for costs and hours of operation)
indicator flashes.
indicator flashing)
indicator becomes static)
indicator disappear).
Helpline UK 0844 800 6503