Table of Contents
Advertisement
Lubrication
CAUTION: To help prevent serious injury or death to you or others caused by unexpected movement, service machine
on a level surface. Lower machine to ground or sufficiently lock or block raised machine before servicing. If machine is
connected to tractor, engage parking brake & place transmission in "PARK", shut off engine and remove key. If machine
is detached from tractor, block wheels & use shop stands to prevent movement.
CAUTION: Use grease based on NLGI consistency numbers and the expected air temperature range during the service
interval. Use a multi-purpose lithium, water resistant, moderate speed, & NLGI grade #2 grease. Other greases may be
used if they meet the following NLGI Performance Classification: GC-LB.
IMPORTANT: Some types of grease thickener are not compatible with others. Consult your grease supplier before mixing
different types of grease.
Alternative Lubricants
Conditions in certain geographical areas may require special lubricants and lubrication practices which do not appear in the
operator's manual. If there are any questions, consult Yetter Manufacturing Co. to obtain latest information and
recommendation.
PART #
13" TAPER TOOTH R.M. WHEEL
2967-404
13" SHARK TOOTH R.M. WHEEL
2967-602
2967-186
FLOATER WHEEL KIT W/R.M. WHEEL
2967-596
HEAVY DUTY OR BEVEL R.M. WHEEL W/
FLOATER WHEEL KIT
Storing Lubricants
Your machine can operate at top efficiency only if clean lubricants are used.
Use clean containers to handle all lubricants.
Store them in an area protected from dust, moisture and other contaminants.
Lubrication Symbols
Lubricate with grease at hourly interval indicated on symbol.
Lubrication Intervals
Residue Manager
IMPORTANT: The recommended service intervals are based on normal conditions; severe or unusual conditions may
require more frequent lubrication.
46
MAINTENANCE
DESCRIPTION
Residue Manager/Coulter Combo
OUNCES OF GREASE
1.12 OZ
1.12 OZ
2.08 OZ
2.40 OZ
Advertisement
Table of Contents
