Yetter AIR ADJUST 2940 Operator's Manual page 18

Residue Manager Installation Con't
Step 3: Install the Wheel Mount (2940-215 or 2940-216) on the adjustment tube of the mounting bracket assembly.
th
Recommended mounting location is 5 hole down from the top of the adjustment tube mounts to the top hole of the wheel
mount. Adjustments may need to be made depending on tillage practice, soil conditions, and/or residue thickness.
Tools needed are a 9/16 socket, 9/16 wrench, impact, and a 10" extension.
Step 4: Mount the RM wheels on the wheel mount using 2) 5/8" lock washers & 2) 5/8 hex nut. Mount the wheels so the left
side of the planter has the left wheel leading, right wheel trailing. Mount the wheels so that right side of the planter has the
right wheel leading, left wheel trailing. Right & left is determined by standing behind the planter looking at the tractor or sitting
in the tractor facing forward. Diagram below is proper installation for the right side of the planter. Tighten using a 15/16
wrench. (Ratcheting wrench if available) Note: Properly install row cleaner wheels so that wheel teeth curve back
when entering field debris.
It is highly recommended to wear gloves & use caution when tightening wheels!
18