Table of Contents
Advertisement
16 Résolution de problèmes
Breakdown
Power
Power
Motorised wheel
Motorised wheel
Motorised wheel
Motorised wheel
Distance per load decreases
Distance per load decreases
Distance per load decreases
Loading
Cause
breakdown
possible
Battery
eating
not properly
Battery is not properly
inserted
The battery is discharged
The engine forces when
going uphill
The engine forces on the
plate
Noise
appear
motorized wheels rotate
The engine stall in slope
Low
environment below 0 °c
The battery has reached
its end of life
Battery
damaged
Solution
is
Check
the
battery
Cause possible
and
vibrations
when
the
temperature
Driving on roads or
slopes with climbs and
descents.
charging
41 / 46
Solution
Check the battery installation on its
support
Check the battery charge level and
charge it if necessary
This is normal, when the slope is too
large you have to manually assist the
Yomper.
Check that the maximum allowable
load has not been exceeded and that
the correct speed is set or selected.
If not, contact your dealer for
analysis.
Contact your dealer for analysis
This is normal, when the slope is too
large you have to manually assist the
Yomper, or play with the speeds of
the Yomper.
When your battery is low (< 20%), it
can happen that the Yomper stall
during intense exertion. After a few
seconds, you will be able to leave,
we advise to help the Yomper on the
important slopes, you can use the
Yomper without problem on more
flat surfaces.
If you have many courses requiring
constant Yomper effort, or in case of
significant
user
recommend the optional battery that
will be more efficient over time.
This is normal, these are the
characteristics of lithium batteries.
This is normal, on such journeys the
energy
consumption
important.
Contact your dealer for battery
replacement.
is
Contact your dealer for replacement
weight,
we
is
more
Advertisement
Table of Contents
