Replacing The Filters - Bissell AIRRAM 2167 Series User Manual

Replacing the Filters

Slide the filter onto the separator.
Removing and Cleaning the Brush Roll
If the brush bar jams during use,
the AirRam™ will stop and the LEDs
will turn red. Before checking for a
blockage, remove the Battery.
NOTE: The Brush Roll should be pulled first from the side near the release
button.
Slide the filter back into the Dirt Bin.
Rest the AirRam on its side and
locate the Brush Roll release button.
Press and hold the button and pull
out the Brush Roll.
global.BISSELL.com
11