Section 2: Wsk-Wgi Wireless System Gateway; Description; Agency Approvals; 1: Fcc - Honeywell SILENT KNIGHT SWIFT Instruction Manual

Smart wireless integrated fire technology

Table of Contents

2.1 Description

The WSK-WGI is a device in a wireless fire system that acts as a bridge between fire alarm control panels (FACPs) and wireless fire

devices. All wireless fire devices communicate with the gateway over the wireless network formed by the devices and the gateway.

The gateway is powered by either the SLC loop or by any external +24VDC UL listed power supply. The gateway uses the SK protocol

on the SLC to communicate with the panel and a proprietary wireless protocol to communicate with wireless fire devices. The following

graphic is an illustration of the components of the SWIFT Network.

wired SLC devices

2.2 Agency Approvals

2.2.1 FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: PV3WFSGW

WARNING: DO NOT MAKE CHANGES TO THE EQUIPMENT

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT.

2.2.2 Federal Institute of Telecommunications

This device utilizes the Honeywell915 rev A radio module and complies with IFETEL standard(s).

IFT: RCPHOSW14-1983

2.3 Specifications

Following are the specifications of the wireless gateway.

External Supply Electrical Ratings

SLC Electrical Ratings

Maximum current when using the external supply

Maximum current when using the SLC power supply

Maximum SLC Resistance

Minimum signal strength level needed at the receiver for a primary path with weak

link trouble reporting enabled.