Remote Control; Load Default; Product Information; Appendix - Matrix Audio element X User Manual

Users Manual

5.13 Remote Control

If there are more than 1 Matrix device in the same
place, in order to prevent one remote control from
controlling multiple device at the same time, element
X has 5 built-in sets of remote control address codes,
which can be switched under this option to achieve
'one-to-one' control between the remote control and
the host.
Remote Control
13
Press the knob to enter the remote control settings as
shown below, at this time, you will see the current
remote control address code on the screen, press the
button on the remote control and the screen will
display the corresponding name. Hold the Standby
and Filter buttons on the remote control for 5 seconds
at the same time, the screen will display a new address
code, press the 2 buttons again within 5 seconds to
switch to the next address code, repeat the operations
above to select the address code, press '
return to the menu page.
ADD: 1
Key: Filter

5.14 Load Default

Press the knob in this option, all the settings will return
to default.
14
Enter

5.15 Product information

Push the knob under this option, the hardware and
software information will shown on the screen.
15
' or '〇' to
Set
Load Default
Enter
Product info
Enter
16

Appendix

6. Appendix
6.1
Audio file formats and sampling rate supported
MA player supports the following audio file formats：
MP3, WMA, WAV, AIF, AIFC, AIFF, AAC, FLAC, OGG, APE,
ALAC, M4A, DSF, DFF
PCM sampling rate support up to：
PCM
16/24/32Bit_44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz,
768kHz
DSD sampling rate support up to：
DSD 2.8 MHz, 5.6 MHz, 11.2 MHz, 22.4MHz
More audio file formats could be supported through
future firmware updates.

6.2 About MQA

(Master Quality Authenticated)
MQA is an award-winning British technology that
delivers the sound of the original master recording.
The master MQA file is fully authenticated and is
small enough to stream or download.
'MQA' or ' MQA.' indicates that the product is
decoding and playing an MQA stream or file, and
denotes provenance to ensure that the sound is
identical to that of the source material.
'MQA.' indicates it is playing an MQA Studio file, which