Table of Contents
Advertisement
Play
4.1.2 Select the input source
Repeat pressing the menu button ' ' and switch to input channel selection menu,
then rotate the knob to select between auto, coaxial 1, coaxial 2, optical 1, optical
2, IIS LVDS, USB Audio and network, you can press the knob to confirm the
selection.
Under 'Auto' mode, element X will automatically scan all digital input channels, the
first connected input channel will be locked immediately. It will continue to scan
other channels until the current channel signal is lost. When there are several input
channels being connected, element X is always locking the signal which is detected at
first. The order of input channel scanning is as shown,
COAX 1
COAX 2
USB
Network
When selected 'Auto' channel and the input signal being locked, it will show the auto
scan mark beside the of the channel name. As shown,
Optical 1
PCM 44.1
When using network related music source such as AirPlay, DLNA, ROON or MA player,
please select Network input channel.
OPT1
OPT2
IIS LVDS
k
Filter 5
UNBAL
4.1.3 Select output channel
Repeat pressing the menu button '
you can select output channel between balanced headphone output, single-ended
headphone output and line output, then push the button to confirm. The switching
order is as follow,
Single-ended
headphone
When single-ended headphone output is changed to balanced headphone output, in
order to avoid being scared, the output volume will reduce 6dB to make the balanced
headphone have the same volume as single-ended headphone.
4.1.4 Volume control
4.1.4.1 Volume adjustment
The volume can be adjusted by the knob or the
and the screen will show the current volume level at the same time. Line output and
headphone output have independent volume control level, also, the line output can
be configured as fixed level output.
09
Users Manual
' and switch to output channel selection menu,
Line out
Balanced
headphone
and
key on the remote control,
COA
COA
OPT
OPT
IIS
AES
USB/NET
USB
Filter
Filter
Advertisement
Table of Contents
