Packing list Users Manual 1.Packing list 2.Parts and name Front panel 1. Standby 7. Display 2. Menu 8. Remote control sensor 3. User-defined 9. LED indicator 4. Volume/control knob 1. Product x1 4. USB cable x1 5. XLR3/6.35mm headphone jack 2.
Parts & name Users Manual Rear panel 2.3 Display screen 2.3.1 Dispaly in main interface area Optical 1 PCM 44.1 Filter 5 UNBAL 1. Status for NAS devices 6. Sampling rate 2. Status for USB storage devices 7. Assistant information 3.
Please make sure to switch the bottom power voltage according to your local valtage shock when you touch it. enviroment before using. As shown: Please unplug the power cable, if you need the element X to be disconnected from the power. AC 220-240V...
Page 8
There are two headphone hybrid chassis jacks and one XLR balanced headphone jack. optical port; You can use three ways to connect to headphone: Connection for digital interface products of Matrix Audio through IIS prot. Game Console CD Player Computer It is advisable to connect with high-impedance headphone for the best sound effect.
In order to avoid damage to your devices, please turn off the active speakers or There are two USB HOST ports on the rear panel to connect with standard mass amplifiers before you connect them to element X. storage USB devices.
3.6 Connect to LAN 3.7 Connect to WLAN Connect to LAN, please use ethernet cable to connect element X with router ( 3.7.1 Please make sure to properly install the two Wi-Fi antennas on the rear panel recommend using CAT-5 or higher version shield ethernet cable), and let element X in (insert the Wi-Fi antenna into the jack and tighten it clockwise).
The LED indicator will turn to dimmed after element X is connected to power supply, indicating that it has entered the standby status, press the 'Standby' button on the Computer unit body or remote control, element X will power on, and the LED indicator will turn to highlight white. Connect to LAN port...
When there are several input headphone have the same volume as single-ended headphone. channels being connected, element X is always locking the signal which is detected at first. The order of input channel scanning is as shown, 4.1.4 Volume control...
DO NOT set up to 'Fixed output' mode, otherwise this When element X is playing PCM or DSD music, users can select the digital filters to get operation may damage to your devices and harm to your ears.
. Connect the Wi-Fi of your iPhone or iPad to the same local area network as the element X, and click AirPlay to select element X as audio device, then choose and enjoy your favored music.
'Install' 4.5 USB Audio When the element X needs to be connected to computer as an USB DAC, please install driver for Windows 7/8/10 which can be found in Matrix official website, the URL of the download page is: https://matrix-digi.com/en/downloads/, the installation process as follow, Step 3:...
Use Apple Lightening to USB Camera Kits to connect element X with iOS devices. Lineout Mode element X can be connected to an Android device with Micro USB or Type-C USB port 10dB ADJ via the OTG cable, but it's not guaranteed to be compatible with all Android devices.
Settings Users Manual In order to avoid misoperation, switching from 0dB ADJ or 10dB ADJ to 0dB Fixed requires a 2-step confirmation, press "〇" button to Headphone Gain High confirm, other operations will cancel this setting. (Tested at 1kHz) 5.2 PCM Filters 5.3 DSD Filters 5.5 Dither 7 Configurable digital filters with different frequency...
LAN, Wi-Fi is disabled and vice 6.4 (page 17). element X will enter Sleep mode. element X will not versa if you select Wi-Fi, ethernet is disabled. enter 'Auto Sleep' mode when 'Auto Sleep' function is TYPE A (Default)...
Appendix Users Manual 6. Appendix 5.13 Remote Control 5.14 Load Default If there are more than 1 Matrix device in the same Press the knob in this option, all the settings will return place, in order to prevent one remote control from to default.
MA player 352.8 6.4 IIS-LVDS Port The IIS port of element X is a standard 19-pin HDMI 6.3 USB storage device requirements connector. It uses four sets of LVDS differential signals to transmit IIS data. It supports up to 32Bit/768kHz PCM signal input and 1Bit/45.1MHz DSD signal input.
Page 22
Appendix Users Manual TRS 6.35mm Definition: Dimension Precautions - This product is for indoor use only. 340×281×60mm (L×W×H, including the protruding part) - For full ventilation, it is recommended to reserve a space of larger than 5 cm around the device. - Do not cover the air vents with stuffs such as papers, 340mm tablecloths, and curtains to obstruct ventilation.
Need help?
Do you have a question about the element X and is the answer not in the manual?
Questions and answers