How To Operate - BioEnergiser circulation maxx reviver Instruction Manual

H OW TO OP ERATE
For Foot ‒ SOLE
Tips: In order to increase the conduction, apply
Circulation Reviver Foot gel on your sole.
TM
1. Place your bare feet onto Circulation Reviver
socks).
2. Press the on/off button, the LCD screen will light up in Orange.
And the program show AUTO and both Band shown in 00, which
is in standby mode. (see Fig. 1)
3. Gently increase intensity setting by pushing the button of "
SOLE +". Or decrease intensity setting by pushing the button of "
SOLE -". The intensity level is adjustable between 0 and 99. The
LCD display will show the selected level. (see Fig. 2)
4. You can adjust the auto off timer by pressing the "Time ‒" or "
Time +". Timer range from 1-60 minutes. To terminate the
massage period, user can turn off the unit anytime by pressing
the on/off Button once. And the timer start to count down from
your time setting (see Fig.3)
5. If you satisfaction on the current massage program then you
can lock the current massage programme by press the
Auto/Mode key, then the rest of the massage time will only run
the selected massage program. (see. Fig. 4)
Important Information:
A. The aim is not to get up to ʻ99ʼ.
B. Chose an intensity level that is comfortable for you!
This level may vary from day to day.
C. Remember to drink plenty of fluids ‒ if you are dehydrated,
this will reduce the effectiveness of the device.
D. If you have dry feet ‒ moisturise them or apply
Circulation Reviver
TM
6 For more information about BioEngergiser Products visit our website at: www.globalproductcom
(do not wear
TM
Foot Gel for maximum health benefits.
8
Fig. 1
Fig. 2
Fig. 3
FIG. 4