Functions Of Control Panel - BioEnergiser circulation maxx reviver Instruction Manual

FUNC TI ON O F CONTROL P ANEL
LCD showing the
intensity level for Sole
maximum 99 levels
LCD showing the program
in AUTO or in MODE.
Electrode area of the unit and the gel pad
FIG. A
For more information about BioEngergiser Products visit our website at: www.globalproductcom
AUTO/MODE
On the device the black
colour area on the device
which is the electrode
area for the sole. (see. the
fig. A)
LCD showing the timer
ON/OFF switch button
Decrease the output intensity of
BODY ‒
body (Available from 1 - 99 levels)
Increase the output intensity of
BODY +
body (Available from 1 - 99 levels)
Decrease the output intensity of
SOLE -
Sole (Available from 1 - 99 levels)
Increase the output intensity of s
SOLE +
ole (Available from 1 - 99 levels)
Decrease the operation time
TIME -
(available from 1-60 minutes)
Increase the operation time
TIME +
(available from 1-60 minutes)
Auto - is the preset program with
14 pattern in cycle running for Foot
and 10 pattern in cycle running for
body Mode - user can fix the
program to the exiting massage
pattern on the rest of the time
FIG. B
7
LCD showing the
intensity level for body
maximum 99 levels
On the gel pad, the
black colour area on
the sticky part is the
electrode area for the
body, size is 5 cm x 9
cm. (see. the fig. B)
5