Identification, Service And Technical Support; Supplementary Documentation - DP Megacontrol Series Installation And Operating Instructions Manual

2 Identification, service and technical
support
2.1 Identification, service and
technical support
The system is identified based on the text
"Megacontrol " as given on the front of the system.
Table 1: Control unit
Indication Meaning
Megacontrol Type of Control unit
The following address data are available for service
and technical support:
Table 2: Address service department
DP-Pumps Tel: +31 172 488388
Fax: +31 172 468930
Kalkovenweg 13 Internet: www.dp-pumps.com
2401 LJ Alphen a/d Rijn E-mail: dp@dp-pumps.com
The Netherlands
2.2 Supplementary
documentation
This version is valid from Megacontrol version V1.7.1
Apart from this manual, the additional documentation
given below is available as well:
Table 3: Supplementary documentation
Document
General terms of delivery
Manual WSD-Sensor
Modbus
Profibus
Also see: www.dp-pumps.com
Table 4: Megacontrol versions
Firm ware version (see parameter: 4-1-3) Manual
Megacontrol V 1.52
Megacontrol V 1.57
Megacontrol V 1.6.2
Megacontrol V 1.7.1
Also see: www.dp-pumps.com
Code
119 / 1998
BE00000250
BE00000584
BE00000585
version
01-2013
01-2014
06-2015
05-2016
5