Liftgate - Chrysler Pacifica 2017 Repair Manual

RU
NOTE: Left side Taillamp Pocket (1) shown, right side similar
1- Liftgate Taillamp Pocket
2- Liftgate Inner Panel
A- Structural Adhesive
B- Anti-Flutter Adhesive
C- Seam Sealer
WARNING: There are necessary safety factors to follow when working with components made of
magnesium and components made of a combination of materials utilizing magnesium that
must be followed.
• Do not grind on the component. The grinding residue is highly combustible.
• In the event of a fire, a D-class rated fire extinguisher is necessary to extinguish.
• Do not expose the component to open flame or temperature in excess of 260° C. (500° F).
Failure to follow these instructions may cause serious injury or death.
NOTE: Due to the usage of magnesium, do not attempt to repair the liftgate inner panel (1) and liftgate
taillamp pocket (2). For further information refer to Inner Liftgate DO NOT REPAIR
Collision/Standard Procedure/Non-Structural Sheet Metal Repair/Inner Liftgate Do Not
The textured finish differs from a smooth finish typically found on closure panels.
• The texture is produced from the casting of the component as compared to smooth stamped sheet metal.
• This finish is completely normal and acceptable.
• Do not remove the textured finish to produce a smooth finished appearance.
31 - Collision Information

Liftgate

31 - 97
(Refer to 31 -
Repair).