Chapter 3: Snmp - Tripp Lite UPS SNMPWEBCARD User Manual

Managing the UPS
e. Save settings. The card will then reboot; depending on the selected configuration settings, it will take 2-5 minutes for the card to
become initialized.*
5. Prepare SNMPWEBCARD for Operation
a. Remove the cable connecting the SNMPWEBCARD to the computer.
b. Test network configuration by pinging the IP address given to the SNMPWEBCARD.
c. If test is successful, replace the UPS accessory slot plate and secure it with screws to hold the SNMPWEBCARD firmly in
position.
* Or configure other SNMPWEBCARD settings as explained in this chapter.
5