Chapter 1
Introduction
Congratulations on the purchase of your new UPS SNMP/Web Adapter. Your UPS SNMP/Web Adapter will connect your UPS to your LAN.
This will allow you to monitor and control the UPS from any PC on the LAN, using either:
•
SNMP protocol and popular SNMP network management platforms such as HP OpenView, IBM NetView, etc., or
•
A Web browser.
System Requirements
UPS SNMP/Web Adapter Card
•
Tripp Lite UPS with a standard card slot.
•
Ethernet networking environment using the TCP/IP protocol.
•
SNMP-based management station such as:
HP OpenView,
IBM NetView
Sun SunNet Manager,
Novell ManageWise
•
Web browser supporting HTML frames, forms and Java, such as:
Netscape Navigator 3.0 or later
MS Internet Explorer 4.0 or later
•
For "Terminal Mode" configuration, a terminal emulation (communication) package.
External UPS SNMP/Web Adapter
•
UPS with a standard serial port.
•
Ethernet networking environment using the TCP/IP protocol.
•
SNMP-based management station such as:
HP OpenView
IBM NetView
Sun SunNet Manager
Novell ManageWise
•
Web browser supporting HTML frames, forms and Java, such as:
Netscape Navigator 3.0 or later
MS Internet Explorer 4.0 or later.
•
For "Terminal Mode" configuration, a terminal emulation (communication) package.
-OR-
-OR-
1