Steps
1. Locate the power button with fingerprint slot on your computer.
2. Align and place the power button with fingerprint into the slot on your computer.
3. Install the two (M2x2) screws that secure the power button to chassis of your computer.
Next steps
1. Install the
system
board.
2. Install the
memory
module.
3. Install the
inner
frame.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the HDD.
7. Install the
solid state
drive.
8. Install the battery.
9. Install the
base
cover.
Disassembly and reassembly
99