4. Connect the keyboard, keyboard backlit cables on to the connector on the palmrest.
Next steps
1. Install the
system
board.
NOTE:
System board can be removed with heatsink attached.
2. Install the
memory module
3. Install the
inner
frame.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the HDD.
7. Install the
solid state
drive.
8. Install the battery.
9. Install the
base
cover.
10. Follow the procedure in
Keyboard bracket
Removing the keyboard bracket
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
solid-state
5. Remove the HDD.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
9. Remove the
memory
module.
10. Remove the
system board
NOTE:
System board can be removed with heatsink attached.
.
11. Remove the keyboard.
About this task
The figure indicates the location of the keyboard bracket and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
drive.
computer.
Disassembly and reassembly
93