Configuration - THOMSON LENS 200 Manual

IMPORTANT NOTE:
After successful pairing of your camera, it is linked
to your account and, for security reasons, cannot
be linked to another account without your consent.
If you change your account and want to swop over
your camera, you must remove the camera from
the previous account before you can assign it to
the new one.
After successful pairing of your camera, the app
displays the main screen:
Adding a camera to the list of cameras already
known to the application (provided that the
1
cameras are not already specified in another
account)
2
Access to the camera configuration page
The red dot indicates the presence of events that
3 have not yet been viewed in the "Message/s"
section (at the bottom of the screen)
Personalised name of the camera (this can be
4
changed on the camera configuration page)
Thumbnail of the camera image. This automatically
5 updates with each new arrival on the main screen,
and may be forced by swiping downwards.
6
Homepage: main screen
Message(s): the latest events captured by the
7
camera are listed here
Additionally: configuration of the account and the
8
app itself
MOTORISED 1080P INDOOR SECURITY CAMERA PACK
Access the camera settings page by clicking on the
icon to access all of the functions available:
1
2
3
4
5
6
7
8
Access to removal of the camera (allows for
1
"transfer" to another account)
Personalised name of the camera: click here to
2
rename your camera
Configuration and use of the alarm function:
3
arming / disarming etc. (see below)
4
Enables/disables the camera' s microphone
Activation / deactivation of the indicators on the
5
camera face
6 Deactivation of the camera infrared lighting
Adjustment of movement detector sensitivity and
7 activation / deactivation of camera beeps for
alerts or actions performed via the remote control
8
Camera time zone
9 Activation of daylight saving time
10 Date format: day/month/year or month/day/year
D - CONFIGURATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
EN
11