Opening Detector Start-Up - THOMSON LENS 200 Manual

4 - OPENING DETECTOR START-UP

The opening detector is installed on the mobile
part of the access point to be monitored (door,
bay window, window) using the double-sided tape
provided. The detector can be removed from its
base to recharge its battery.
Two thicknesses of double-sided tape are included:
the thicker one should be used on metal surfaces.
Once your camera is in use, you can pair it with
your opening detector: click on the "+" icon to pair
your detector (just like you have already done for
your camera).
The app will ask you to scan the QR code on the
sensor out of its bracket:
MOTORISED 1080P INDOOR SECURITY CAMERA PACK
The app will immediately invite you to pair the
detector with the camera. Click on "Liaison"
(Connection) to validate.
To complete the confi guration, you must indicate to
your opening detector what position it is in when
the door or the window it monitors is closed. Place
the detector in its location when the door is closed.
Then hold down the button on the front panel of
the detector until the LED light turns red.
C - INSTALLATION
9
EN