Dispose a Frozen Washing Machine
When the temperature drops below zero and your washing machine gets
frozen, you may:
1.Disconnect the power supply for the washing machine.
2.Wash the tap with warm water to loosen inlet pipe.
3.Take down inlet pipe and immerse it in warm water.
4.Pour warm water into washing drum and wait for 10 minutes.
5.Reconnect inlet pipe to the tap and check whether inlet and outlet are
working normally.
Notes: when the washing machine is reused, make sure the ambient
temperature is above 0 C.
Anti-freeze
If your washing machine is located in the room where it can get frozen
easily, please drain the remaining water inside drain pipe and inlet pipe
thoroughly.
Remove the remaining water in inlet pipe:
1. Close the tap.
2. Screw off the inlet pipe from tap and put its
end into the container.
3. Start up any procedure except single Wash
or Drain procedure. Water will be drained out
of inlet pipe if any for about 40 seconds.
4. Reconnect the inlet pipe to tap
Remove the remaining water in drain
pump
WARNING
To avoid burning, it shall be done after the hot water inside the machine
cools down.
23
Need help?
Do you have a question about the WMM-714A+++ and is the answer not in the manual?