Washing Clothes at first time
Before washing clothes at first time, the washing
machine shall be operated in one round of the
whole procedures without clothes in as follows:
1.Connect power source and water.
2.Put a little detergent into the box and close it.
3.Press the button "On/Off".
4.Press the button "Start/Pause".
The drawer is separated as follows:
I.
Pre-detergent or washing powder.
II.
main detergent, softener, pre-dip,
bleaching or decontaminating
products.
:washing additive, such as fabric softener or tackifier.
Put detergent into washing machine
1. Pull out the drawer.
2. Fill pre-detergent into Case I (when necessary).
3. Fill detergent into Case II.
4. Fill softener into Case
Notes:
- As for the agglomerated or ropy detergent or additive, before they are
poured into the detergent box, it is suggested to use some water for
dilution to prevent the inlet of detergent box from being blocked and
overflowing while filling water.
- Please choose suitable type of detergent for the various washing
temperature to get the best washing effect with less water and energy
consumption.
Start up washing machine
Connect the power. Check if water pipes are connected properly. Open the
tap completely. Put in the clothes to be washed and fill in the detergent and
tackifier. Then press the button "On/Off",Select the proper procedures and
functions and press the button "Start/Pause".
(when necessary).
16
Need help?
Do you have a question about the WMM-714A+++ and is the answer not in the manual?