After Use
Before detaching parts, make sure that the motor has stopped completely, then disconnect the plug
from the outlet.
Note
• Do not use benzine, thinner, alcohol, bleach, polishing powder or metal brush otherwise the surface
will be damaged.
• Do not use a dishwasher.
Detaching
Detach by reversing steps from 1-5 of P.EN8-9 (Attaching).
When it is hard to remove the cap,
place a screwdriver between
the protrusions and
unscrew.
Cleaning
■ Remove meat and other foods before cleaning.
Cap
Head
Wash with diluted dish soap (neutral) and a soft sponge, and dry well.
• Leaving the parts wet after cleaning may cause corrosion.
Feed screw
Cutting blade
Cutting plates
Wash with diluted dish soap (neutral) and a soft sponge, and dry well.
• Leaving the parts wet after cleaning may cause corrosion.
<Easy cleaning for the ne and medium cutting blades>
It is easy to remove the remaining ingredients from holes of the cutting plates by
pressing them out with the cleaning tool.
<To keep better condition>
Rubbing a little vegetable oil after washing and drying will help prevent them from
rusting and keep them lubricated.
EN12
When it is hard to remove the cutting plate,
place a screwdriver between
the cutting plate and
the head as illustrated and
lift up.
Hopper plate
Sausage
Food pusher
attachment
Wash with diluted dish soap (neutral) and a soft sponge, and dry well.
• Use a brush to clean the cleaning tool.
Motor housing
Wipe with a well-wrung cloth.
Storing
< Cord storage >
① Pinch the tabs as illsutration on the right and pull up
the cover to open.
② Store the power cord and power plug and close the cover.
・ When you store in or out the power cord and power
plug from storage, lower your sight and do not let the
power plug prong touch the power cord.
・ You hear a sound when it is closed firmly.
< Attachments storage >
(for cutting plates/kubbe attachment A and B/ sausage
attachment/cleaning tool)
① Pull the storage out and lift it up to remove the storage.
② Place the attachments as illustration on the right.
・ Reversing steps to attach the storage.
Push the strage in until you hear the sound.
Kubbe
Kubbe
attachment A
attachment B
Cleaning tool
EN13