Download Print this page

Voltage Regulation - Tripp Lite SmartPro SMART3000VS Specification Sheet

3kva line interactive ups, extended-run
Hide thumbs Also See for SmartPro SMART3000VS:

Advertisement

Half load runtime (minutes)
Expandable battery runtime
External battery pack
compatibility
DC system voltage (VDC)
Battery recharge rate
(included batteries)
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery replacement
description

VOLTAGE REGULATION

Voltage regulation
description
Overvoltage correction
Undervoltage correction
Severe undervoltage
correction
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
UPS AC suppression
response time
EMI / RFI AC noise
suppression
PHYSICAL
Installation form factors
supported with included
accessories
Primary form factor
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / inches)
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / cm)
14 min. (1125w)
Extended runtime supported via optional external battery packs
BP48V24-2U
(limit 1);
BP48V60RT-3U
48
Less than 4 hours from 10% to 90%
RBC54
Battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 79V to 147V
Input voltages between 128 and 147 are reduced by 12%
Input voltages between 95 and 104 are boosted by 12%
Input voltages between 79 and 94 are boosted by 24%
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates power-failure, overload and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
480
Instantaneous
Yes
Tower
Tower
14.2 x 9.2 x 12
36.2 x 23.5 x 30.5
(multi-pack compatible)

Advertisement

loading