Table of Contents
Advertisement
Available languages
Available languages
To integrate the module into your system and enable it to
communicate with other Homematic IP devices, it has to
be connected to your Homematic IP Access Point first.
To connect the module, proceed as follows:
•
Open the Homematic IP app on your smartphone.
Select the menu item "Teach-in device".
•
•
After connecting the module to the power sup-
ply, the teach-in mode remains activated for 3
minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
briefly (see figure 7).
•
Your device will automatically appear in the
Homematic IP app.
•
To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
•
Wait until the connection is completed.
•
If the connection was successful, the device LED
(A) lights up green. The device is now ready for use.
•
If the device LED lights up red, try again.
•
Please select, in which application you would like
to use the device.
•
Allocate the device to a room and give the device
a name.
Start-up
29
Advertisement
Chapters
Table of Contents
