Table of Contents
Advertisement
5) SansAmp DI-2112 is very responsive. Our controls are unusu-
ally sensitive and powerful. You need not set everything at max to get maxi-
mum results. For instance, to brighten your sound, rather than automatical-
ly boosting High all the way up, try cutting back on Low first.
The tone controls also help compensate for the EQ curves found in instru-
ment amps. To find the best settings for interacting with your amp, start with
the tone controls at 12 o'clock and cut or boost as necessary. Be aware that
amplifiers vary greatly and some may require you to use radical EQ settings on
SansAmp DI-2112 to achieve your desired sound. You need not be discour-
aged or suspect something is wrong with the unit. If you've got your sound,
you've simply found the right balance to complement your particular amp.
6) The noise level of SansAmp DI-2112 is exceptionally low.
However, it may amplify noise emanating from the input source. To mini-
mize noise going into the SansAmp DI-2112, we recommend active elec-
tronic instruments have the volume set at maximum and tone controls
positioned flat. If you need to boost, do so slowly and sparingly.
•Also check for pickup interference by moving your guitar or turning the
volume off. Be aware single coil pickups are more likely to generate noise.
•As is the case with any tube amplifier or electronic device, particularly in
high gain settings, you may be getting outside interference caused by lights,
transformers, etc.
•Be conscious of how the controls interact. Remember, they are atypically
sensitive, so start out "normal" and then go as nuts as you like.
7) LED indicator light. When the battery power begins running low,
the LED will become noticeably dim.
Names of sample settings are intended for descriptive purposes only
and should not be construed as an endorsement or affiliation with the
companies, products, artists or songs named,
except, of course, Geddy Lee.
9
Advertisement
Table of Contents
