Table of Contents
Advertisement
POWER REQUIREMENTS
•
Utilizes standard 9V alkaline battery (not included). NOTE: Input jack
activates battery. To conserve energy, unplug when not in use. Power
Consumption: approx. 5mA.
•USE DC POWER SUPPLY ONLY!
unit and void warranty. DC Power Supply Specifications:
-9V DC regulated or unregulated, 100mA minimum;
-2.1mm female plug, center negative (-).
Optional factory power supply is available: Tech 21 Model
WARNINGS:
• Attempting to repair unit is not recommended and may void warranty.
• Missing or altered serial numbers automatically void warranty. For your own
protection: be sure serial number labels on the unit's back plate and exterior
box are intact, and return your warranty registration card.
ONE YEAR LIMITED WARRANTY. PROOF OF PURCHASE
REQUIRED. Manufacturer warrants unit to be free from defects in materials
and workmanship for one (1) year from date of purchase to the original pur-
chaser and is not transferable. This warranty does not include damage resulting
from accident, misuse, abuse, alteration, or incorrect current or voltage. If unit
becomes defective within warranty period, Tech 21 will repair or replace it
free of charge. After expiration, Tech 21 will repair defective unit for a fee.
ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for Return
Authorization Number. Manufacturer will not accept packages without
prior authorization, pre-paid freight (UPS preferred) and proper insurance.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21 weekdays from 9:00 AM to 5:00 PM, EST.
MADE IN THE U.S.A.
T: 973-777-6996 • F: 973-777-9899
E: info@tech21nyc.com • www.tech21nyc.com
©2014 Tech 21 USA, Inc.
Failure to do so may damage the
#
DC2.
SansAmp Para Driver DI (v2)
OWNER'S MANUAL
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tech 21 SansAmp Para Driver DI v2
Summary of Contents for Tech 21 SansAmp Para Driver DI v2
- Page 1 If unit becomes defective within warranty period, Tech 21 will repair or replace it free of charge. After expiration, Tech 21 will repair defective unit for a fee. ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for Return Authorization Number.
-
Page 2: Product Overview
SansAmp continues to maintain its repu- alone, make sure to set the Output Level Switches as follows: tation as the industry standard. Tech 21 takes great pride in delivering If using 1/4-inch: +10dB engaged (in position). -
Page 3: Guide To Controls
GUIDE TO CONTROLS THE INS AND OUTS DRIVE: adjusts the overall amount of gain and overdrive, similar to when the Follow Standard Audio Procedure to avoid unwanted and potentially speaker- output section of a tube amp is being pushed. For fatter, more robust clean damaging “pops”... -
Page 4: Phantom Power
FOOTSWITCH, SPEAKER SIMULATION with corresponding LED indicator: Engages/disengages the circuitry. Active, LED will be on. Tonality and gain structure are affected as Speaker simulation is an integral part of the SansAmp circuitry. It is specifically determined by the setting of the controls. Delivers effected signal through the designed for a smooth, even response as would be achieved by a multiply- XLR Output and 1/4”... -
Page 5: Sample Settings
SAMPLE SETTINGS SAMPLE SETTINGS ® ACOUSTIC CHAMP GUITAR I ACOUSTIC MONEY FOR GUITAR II NOTHING ACOUSTIC SPARKLE GUITAR III ELEC GUITAR MID-BOOST SCHENKER GUITAR Note: Rumble Filter and Air were Samples Settings are guides to get you started. not engaged (out position) in the Levels will vary depending on the actual making of the Sample Settings. - Page 6 SAMPLE SETTINGS SAMPLE SETTINGS DEEP TUBE UPRIGHT BASS BASS ® BASS ACTIVE BASS SIMULATOR JACO BASS ELECTRIC VIOLIN LEAD BASS CLEAN BOOST...
- Page 7 SAMPLE SETTINGS SAMPLE SETTINGS ELECTRIC SNARE DRUM PIANO ® HAMMOND STOMP BOX ORGAN (COMPRESSOR) DIRECT - CLEAN HIP-HOP STOMP BOX DRUMS (DISTORTION) DIRECT - ROCK KICK DRUMS STOMP BOX (DISTORTION) DIRECT - METAL ®Registered trademarks. Names of Samples Settings are intended for descriptive purposes only.
-
Page 8: Custom Settings
CUSTOM SETTINGS CUSTOM SETTINGS...
Need help?
Do you have a question about the SansAmp Para Driver DI v2 and is the answer not in the manual?
Questions and answers