Product Overview; Operation; Checking The Engine-Oil Level - Toro FP-2200 Operator's Manual

Product Overview

1. Lift handles
2. Water tank
3. Engine
4. Rollcage lifteye
1. Recoil starter
2. Sediment cup
3. Fuel-shutoff valve
Figure 5
5. Air filter
6. Handle
7. Belt cover
Figure 6
4. Choke lever
5. Throttle lever
6. Engine On/Off switch

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.
Checking the Engine-Oil
Level
Service Interval: Before each use or daily
Oil crankcase capacity:
•
0.56 L (0.59 US qt) for Model 68025
•
0.58 L (0.61 US qt) for Models 68026 and 68027
1. Position the machine on a level surface.
2. Set the throttle to slow, shut off the engine, and
wait for all moving parts to stop.
3. Clean around the dipstick so that dirt cannot
g027691
fall into the filler hole and damage the engine
(Figure 7).
g013311
1. Filler tube
2. Dipstick
3. Upper limit
4. Remove the dipstick and wipe the end clean.
5. Slide the dipstick fully into the dipstick tube
without threading it into the filler neck.
6. Pull the dipstick out and inspect the end.
Note:
The oil should be level with the upper-limit
mark (Figure
7
Figure 7
4. Lower limit
5. Oil-drain bolt
7).
g019686