Starting The Engine - Toro FP-2200 Operator's Manual

Starting the Engine

1. Move the engine switch to the O
(Figure 12).
Figure 12
1. Engine switch
2. Move the fuel valve to the O
13).
Figure 13
1. Fuel valve
3. Move the choke lever to the left if you are
starting a cold engine
position
N
g019703
position (Figure
N
g019704
(Figure 14).
1. Choke
4. Move the throttle lever midway between the
S (turtle) and F
LOW
15).
Note:
A warm or hot engine may not require
choking.
1. Throttle
5. Pull the recoil handle sharply to start the engine.
6. After the engine starts, gradually move the
choke to the right.
11
Figure 14
(rabbit) positions
AST
Figure 15
g019774
(Figure
g019775