Setup; Checking The Engine Oil Level; Checking The Eccentric Oil Level; Product Overview - Toro RP-500 Operator's Manual

Setup

Checking the Engine Oil Level

The machine comes from the factory with oil in the engine
crankcase; however, it may be necessary to add oil. Refer to
Servicing the Engine Oil (page 14). Add only enough oil to
raise the level to the Full mark on the dipstick.
Checking the Eccentric Oil
Level
The machine comes from the factory with eccentric oil in
the eccentric housing; however, it may be necessary to add
oil. Refer to Servicing the Eccentric Oil (page 15). Add only
enough oil so that the oil level is flush with the oil plug on the
side of the eccentric housing.

Product Overview

1. Direction control lever
2. Throttle control
3. Air cleaner
4. Lift point
1. Belt cover
2. Fuel tank
3. Lift point
7
Figure 3
RP–500
5. Fuel tank
6. Fuel On/Off switch
7. Oil dipstick
8. Recoil start handle
Figure 4
RP-700
4. Air cleaner
5. Throttle control
6. Direction control lever