Related Manuals for MyBinding Standard M2
Summary of Contents for MyBinding Standard M2
- Page 1 Standard M2 Bookletmaker Instruction Manual Provided By http://www.MyBinding.com http://www.MyBindingBlog.com...
- Page 2 OPERATIONS MANUAL Standard Nagel M2 Bookletmaker Read this manual, and thoroughly familiarize yourself with its contents before operating or servicing this equipment. STANDARD...
-
Page 4: Table Of Contents
BOOKLETMAKER FOLDNAK M2 AB SERIENNUMMER 970717 CONTENTS 1. SETUP 2. LOADING OF STAPLE MAGAZINE 3. ADJUSTMENTS 3.1 PAPER WIDTH 3.2 PAPER LENGTH 3.3 POSITION OF STAPLING HEADS 4. BOOKLETMAKING OR FOLDING 5. TROUBLESHOOTING 6. MAINTENANCE 7. SECURITY 8. TECHNICAL DATA Congratulations for choosing to purchase the BOOKLETMAKER FOLDNAK M2. -
Page 5: Setup
BOOKLETMAKER FOLDNAK M2 COMPONENTS DELIVERED BOOKLETMAKER FOLDNAK M2 with two stapling heads, bag with two knurled screws (1), 5.000 NAGEL-Staples 26/6, instructions manual. 1. SETUP Screw in the two knurled screws (1). Plug in the power cord. 2. LOADING OF STAPLE MAGAZINE •... -
Page 6: Adjustments
BOOKLETMAKER FOLDNAK M2 3. ADJUSTMENTS 3.1 PAPER WIDTH • Position the left side guide (10) according to the paper format required using the scale (2) and fix it with the knurled screw (1) • Insert paper squaring it up parallel to the left guide (10) •... -
Page 7: Bookletmaking Or Folding
BOOKLETMAKER FOLDNAK M2 4. BOOKLETMAKING OR FOLDING • Adjust guides (10, 11, 14) to paper format • Insert paper making sure the sheets are squared up correctly • Push button "START" (6) The stacker (4) can be used to stack a couple of booklets. If you only want to fold paper without stapling then just remove the staples from the stapling heads. -
Page 8: Troubleshooting
BOOKLETMAKER FOLDNAK M2 5. TROUBLESHOOTING Machine is switched on, but the light inside the ON/OFF-Selector (7) is not on The power cord is plugged in improperly: Push power cord thoroughly into power outlet. Circuit braker has been activated: Push circuit braker button in again. It is located at the machine’s rear, beneath the power cord outlet. - Page 9 BOOKLETMAKER FOLDNAK M2 Machine does not staple although the staple magazine is filled Driver blade (16) is not hinged onto pin Hinge hole of the driver blade (16) onto (17): pin (17). Driver blade (16) is missing: Put in a driver blade. The mark "26" must show towards the rear side of the ma- chine.
- Page 10 BOOKLETMAKER FOLDNAK M2 Booklet is stapled correctly but incorrectly ejected Reduced stickiness of fold rollers because Clean fold rollers. of dirt: Too many sheets have been inserted: Do not insert more than 15 sheets. See chapter 9. Booklets are being stapled or folded incorrectly The side guides (10, 11) or the back stop Fix the locking screws of the side guides (14) are fixed improperly and move...
-
Page 11: Maintenance
BOOKLETMAKER FOLDNAK M2 6. MAINTENANCE Replace scratched or bent driver blades (16). Clean the machine only with a soft and humid tissue without chemical substances. Clean the folding rollers using a substance that does not dissolve rubber. 7. SECURITY • The machine must only be used for the stapling and folding of paper. •... -
Page 12: Technical Data
BOOKLETMAKER FOLDNAK M2 8. TECHNICAL DATA Input paper sizes for booklets DIN A5 (5½x8½") - A3 (11x17", SRA3) Maximum booklet size 60 pages or 15 sheets 80g-paper Stapling heads 2, upgradeable to 4 (USA: max. 3) Staple magazine 210 staples/stapling head Staples/Loop Staples NAGEL 26/6 (6mm leg length) NAGEL Ri 26/6 (6mm leg length, loop) - Page 13 BOOKLETMAKER FOLDNAK M2...
- Page 15 Standard Business Systems STANDARD M2/OM 10 Connector Road, Andover, MA 01810 Revised 04/1997 (978) 470-1920 Fax (978) 470-2771 Our Standards Are Simply Better.
Need help?
Do you have a question about the Standard M2 and is the answer not in the manual?
Questions and answers