Table of Contents
Advertisement
22.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
23.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
24.
When servicing a tool, use only identical replacement parts. Follow
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
1.
Ground this product. This Welder requires the attachment and use of a UL
listed, 230 volt, grounded, 3-prong, electrical Power Cord Plug (not included).
Only a qualified electrician should install the Power Cord Plug. Never remove the
grounding prong or modify the Power Cord Plug in any way. Do not use adapter
plugs with this product. To comply with the National Electric Code, and to provide
additional protection from the risk of electrical shock, this product should only be
connected to a 230 volt, 3-hole outlet that is properly grounded and protected by a
Ground Fault Circuit Interrupter (GFCI). (See Figure A, page 10.)
2.
Maintain labels and nameplates on the Welder. These carry important informa-
tion. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.
Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Welder.
4.
Do not force the Welder. This tool will do the work better and safer at the speed
and capacity for which it was designed.
5.
Never leave the Welder unattended when it is plugged into an electrical
outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
6.
Industrial applications must follow OSHA guidelines.
7.
Never stand on the Welder. Serious injury could result if the Welder is tipped or
if hot surfaces are accidently contacted.
SKU 93457
For technical questions, please call 1-800-444-3353.
SERVICE
SPECIFIC SAFETY RULES
Page 6
Advertisement
Table of Contents
