Lifestyle Functions; Overview Parameters - Rehau NEA SMART R Installation And Operating Manual

4.7

Lifestyle functions

Lifestyle functions Symbol
Party
Deactivates the
temperature setback for
XX hours
Presence
Weekend heating times
are also used for working
days
Day (default setting)
Permanent regulation
after setting the target
temperature
Night
Permanent setback to a
programmed night
temperature.
Automatic
Automatic temperature
regulation according to
the correspondingly
activated comfort
programs
Deactivates the room
control unit, the
temperature is still
displayed, frost
protection is activated
Selection of heating or
cooling operation
The operating mode can
be set on the room
control unit D when the
CO pilot function is
activated on the base
station.
Holiday mode
The temperature is set
back automatically to the
set holiday temperature
Child safety lock
Locks the room
operating unit
BACK
The room control unit
returns to the basic level.
Tab. 4-3 Lifestyle functions
Steps
- Activate by pressing.
- Set the duration in hours (hh)
- Confirm your entry by
pressing.
- The automatic mode is only
available on workdays.
- Activate by pressing.
- Finish by selecting another
Lifestyle function.
- Activate by pressing.
- Activate by pressing.
- Activate by pressing.
- Press to switch off the room
control unit D
- A short press switches the
room control unit back on.
(The CO pilot of the base station
is activated.)
- Activate by pressing.
- Select the mode.
- Confirm your entry by
pressing.
- Activate by pressing.
- Select 1. the start date and
2. the end date (dd:mm)
confirm by pressing.
- Deactivate the holiday mode by
selecting the holiday function
again.
- Activate by pressing.
- Deactivate by prolonged
pressing for more than 3 secs).
- Exit the menu by pressing
4.8

Overview parameters

This menu is needed only for basic setup.
- Press the control knob.
- Select the menu "Parameters" and activate it by pressing again.
The following parameters are available to you; you can find further
information in the Table 4-4 (page 10).
It may take up to 10 minutes before changes of global system
parameters are displayed on all room control units.
RES
USER
XX.X
–
XX.X
XX.X
SET
TIME
P0
P0
6-7
1-5
Fig. 4-3 Selection of parameters
+
min.
max.
E-CL
SET
9