Parameters - Rehau NEA SMART R Installation And Operating Manual

4.9

Parameters

Parameters
Temperature for
presence in
heating mode
Temperature
for presence in
cooling mode
Setback temperature
for heating mode
Setback temperature
for cooling mode
Floor heating
minimum temperature
(only in connection
with NEA remote
sensor)
Setback temperature
for holidays
Setting the tempera-
ture limitation
Time control via
external timer (instead
of Comfort programs
P0 to P3)
Select Comfort
program for week
days
Select Comfort
program for the
weekend
Set time/date
Software version of
room control unit
10
Symbol Steps
- Activate and set the desired
temperature.
- Confirm by pressing.
- Activate and set the desired
temperature.
- Confirm by pressing.
- Activate and set the desired
temperature.
- Confirm by pressing.
- Activate and set the desired
temperature.
- Confirm by pressing.
- Activate and select the
desired comfort tempera-
ture
(1.0...6.0 ≈ 18 °C...28 °C)
- Confirm by pressing.
- Activate and set the desired
temperature.
- Confirm by pressing.
- Activate
min - Select the min./max.
max temperature, confirm each
by pressing
- Activate and select the
E-CL
status On or Off.
SET
- Confirm by pressing.
- Activate and confirm entry.
P0
- Select and activate Comfort
1-5
program (P0-P3).
- Activate and confirm entry.
P0
- Select and activate Comfort
6-7
program (P0-P3).
- Activate, set year (yyyy),
SET month (mm) and day (dd)
TIME as well as time (hh:mm),
confirm each by pressing.
- Displays the software
So1
version of the room control
XX-XX
unit
Parameters Symbol
Base station software So2
version XX-XX
Software version So3
Ethernet Controller XX-XX
User level reset
Reset of all user RES
settings to factory USER
settings!
Tab. 4-4 Parameters
Steps
- Displays the software
version of the base station
- Displays the software
version of the Ethernet
Controller
- Activate and select Yes
- Press in order to reset all
functions.