Usage - Razor Electric Party POP Owner's Manual

USAGE

HEADLINE
How to Ride
Standing in the center of the deck engages the foot-controlled power system.
Do not activate the foot-controlled power system (A) (pressure sensor is located under deck grip tape) unless you are
on the electric scooter and in a safe, outdoor environment suitable for riding.
Get on the scooter and place both hands on the handlebars. Kick to start (B).
Note: LED lights (on and below deck) will activate when power system is pressed. Light-up front wheel will activate
when product is in motion.
How to Stop
For controlled stops, apply the brake by putting pressure on the rear-fender brake. Razor recommends that you
practice applying the brake at various speeds and in an open area free from obstructions before riding your scooter
around others.
Need Help? Visit our website for product support, a list of authorized service centers in the US and customer service contact information at www.razor.com.
Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is
listed at the back of this manual.
A
B
6 6
Note: Pressure on the power
system (center of deck) will activate
the power of the electric scooter.
However, the motor is designed not
to engage until the electric scooter
is moving at least 3 mph (5 km/h)
while engaging the foot-controlled
power system.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when brake
is applied.
Note: Motor will re-engage,
(without having to kick to start),
if brake is released and foot-
controlled power system is applied
before scooter has slowed down to
under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.