Environment; Eu Declaration Of Conformity - Festool Carvex PS 420 EBQ Original Operating Manual

Cut in an anticlockwise direction.
Work at a slow rate of advance.
Set the pendulum stroke [1-12] to 0 - 1.
Set the stroke rate [1-5] to 1 - 5.
Store the centring mandrel in the depot
[10-3].
Semi-stationary sawing with the Festool
CMS system
When combined with the Festool CMS system,
the jigsaw becomes a semi-stationary bench
saw for profiled cuts. See the CMS brochure
for more information.
Install your jigsaw with adaptation table in
the CMS as described in the operating man-
ual for the CMS-PS.
11

Environment

Do not dispose of the device in
household waste! Recycle devic-
es, accessories and packaging. Ob-
serve applicable country-specific
regulations.
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
Information on REACh: www.festool.com/
reach
12

EU Declaration of Conformity

Jigsaw
PSB 420 EBQ
PS 420 EBQ
Year of CE mark: 2012
We declare under sole responsibility that this
product complies with the following directives
and standards:
2006/42/EG, 2004/108/EG,
(from 01.01.2013), EN 60745-1, EN 60745-2-
11, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
15.05.2012
C A R V E X
Serial no.
10003822, 10004924,
10003822
10003702, 10004876,
10003702
2011/65/EU
GB
19